How To Install Vinyl Plank Flooring On Stairs? [Definitive Guide]
Are you looking for quick, easy & effective steps on how to install vinyl plank flooring on stairs? You’ve landed on the right page.
Vinyl floors are loved by everyone. The first reason for that is the look it brings. The versatility of choosing the type and texture of the vinyl is the best part that helps people customize it according to their preferences and house theme.
Vinyl floors are very popular and to keep a synchronization among the entire house, people often go for vinyl stairs. It looks amazing if you choose vinyl for both the floors and stairs.
The professional companies can bring you various options to do that and you can let it happen very neatly. But the problem can be with the cost. Professionals charge quite a good amount for installing vinyl on your staircases.
To cut the cost, you have one option – DIY. If you are thinking about the finish and the efforts, let us tell you that every DIY demands time and effort but in turn, it saves a good amount of money.
If you care about your money, DIY is the best you can have. Well, the problem can occur if you don’t know how to install a vinyl floor on your stairs.
Along with seeing some YouTube videos, you can also consider reading this comprehensive article that has covered each nook and corner of DIY on how to install vinyl plank flooring on stairs and if you follow the instructions dedicatedly, you may have a greater outcome than the professional ones. Let’s nail it!
About Vinyl Plank Flooring
Laminate flooring can be installed in the almost same way as vinyl planks, which can be connected by clicking them together. A wide variety of patterns and motifs resemble the laminate or hardwood floor’s look.
A high-resolution image is applied to the surface of planks, which are generally constructed of PVC, but there are also pictures that replicate other flooring kinds.
The top layer serves as a protective barrier against scuffs and stains. Underlayment isn’t necessary for some brands because they have foam or cork at the bottom of the mattress.
Other Resources You May Like:
- Process Of Drying Water Under Vinyl Plank Floorings
- Comprehensive Guide On Eliminating Scratches From Vinyl Floor
Types Of Vinyl Flooring
Luxury vinyl is the most commonly used term to describe vinyl flooring goods, however, there are numerous more varieties of vinyl flooring. Luxurious is a little misleading.
Vinyl planks and tiles are marketed as “non-luxury” products because no one actually makes or sells them. With the adjective “luxury,” vinyl planks and tile are distinguished from the more typical roll-and-glue type of flooring.
Here are some examples of vinyl floor coverings:
Wood-like planks come in long planks, mimicking oak, hickory, and other types of wood, and are available in a variety of colors. Planks have a groove system that locks them together to form a floor.
- Engineered Vinyl Plank: Although compared to LVP, it is a newer product called LVPX that contains a fiberboard core, which gives it greater rigidity and thickness. The goal was to make it look more like hardwood floors. EVP is completely impervious to water.
- Luxury Vinyl Plank (LVP): Laminate or hardwood-like planks constructed of high-quality PVC, LVP is waterproof and often has images of hardwood on top of it. They can be clicked on or glued down.
Sheet vinyl is available in huge, flexible rolls that are completely impervious to water. Homeowners often use it in spaces like the laundry room and bedrooms instead of natural stone, ceramic tiles, or hardwood, but they rarely do so on the stairs.
It is, nonetheless, the most cost-effective vinyl available. Glue-on vinyl is significantly thinner than LVP. Overlaying is usually recommended.
Vinyl tile flooring may be both beautiful and durable. Both interlocking installation and Peel-and-stick installation methods are available for the various patterns and colors. Luxury vinyl tiles are thicker, have more layers, and occasionally have a textured surface than vinyl tiles, making them more durable.
Unlike LVP, LVT is available in a tile form rather than a plank. Glue-down and click options are available for this type of flooring, which contains patterns that imitate ceramic tile. All but a few brands are water-resistant.
Should You Put Vinyl Plank On Stairs?
Stairs can be covered with vinyl plank flooring. Planks can be nailed to the risers and treads of your stairs with precision if you take exact measurements. Nosing pieces should be installed at the transition between the stair tread and the riser.
If you’re buying LVP for a stair installation, make sure you know what kind of stair nose piece you need before you buy. Some will have a nose that extends past the end, but others will have one that is flat with the surface.
Make sure your LVP brand has flush nosing if you like the look and feel of it. It takes longer to install flush nosing than overlapping nosing, but the result is a more comfortable trip up and down the stairwell.
Due to their longevity and ease of installation, vinyl planks on stairs are popular with many homeowners. Ultra-high-strength adhesives are used to secure the boards, and the installation process is simple.
Managing The Transition To Vinyl Plank Stairs
Vinyl stair tread tiles are popular with many homes due to their lower size and ease of installation. However, if you need to wrap the vinyl around the edge of the stairs, sheet flooring may be the best option.
Decide on a vinyl flooring type based on the aesthetic you want to achieve on your steps, as well as the installation technique that is most convenient for your needs.
Additionally, vinyl stair treads, or the portions that extend over the edge, are available for purchase. When it comes to the front of your staircase, you don’t need to cut tiles to fit.
It is highly recommended that you measure and design your vinyl flooring arrangement for your staircase as well as the rest of your home. Creating to-scale drawings for your planks or vinyl tiles will help you choose the best way to lay them.
The edges of the stairwell may become obscured by slivers of tile if you don’t plan beforehand. If you take the time to measure and plan your tiles, you won’t have to worry about leaving any unattractive parts in the pattern.
Starting with the treads and keeping them at the center of the steps is a good way to incorporate them into your design. To finish the rest, you may need to cut additional parts.
You must want your staircase installation to go well, don’t you? To begin, make sure you have all of the necessary equipment and supplies on hand. You’ll need the following:
- A saw
- Caulking gun
- Tape measure
- A drilling or nailing gun
- Stair-tread gauge
- A blade with a good tooth
- Carpenter square
As materials, you must need:
- Construction glue
- Have the planks
- Nails or screws
- Stair nosing
When it comes to doing this activity, you should never skip it. Before you can begin installing the vinyl plank flooring, you must first prepare your stairwell.
As a result, before you even begin, get the planks at least 48 hours in advance of the day of the major event. Preparation will be easier because you have more time.
First, you’ll need to remove all of the moldings and trim that’s surrounding the staircase. It will help you get accurate measurements so that the vinyl planks can be installed in the right manner.
Additionally, you should scrub the steps with a broom and soapy water. Make sure you have adequate room for the stair nose and tools and after you’ve cleaned up. The nose of the staircase is the highest point.
Remember to remove the baseboard from the steps. Remove all overhangs with the jigsaw in this stage. Finally, make sure that your steps are on the ground level as part of your preparations.
In other words, there should be no bumps on them. The caulking gun is the tool you’ll need for this task. The vinyl planks for your staircase can now be installed. This is where the real work begins, so let’s get started.
Keep Reading: Comprehensive Steps On Shining Your Laminate Floors
Installation Steps On How To Install Vinyl Plank Flooring On Stairs
Post to the preparation process, it is time to take the big leap directly – the installation process. There are certain ways that you must follow the make the installation is done in the best way and to make this DIY perfect for you, we have prepared these steps. Continue reading.
Stair risers are an essential part of every staircase. All staircase steps have the same top portion. As a result, you should be able to make an informed decision on whether or not to lay the planks or treat them.
Keep in mind that these procedures require doing all possible to transform your hair to the color you desire. Installing vinyl flooring boards on the stair riser is another option.
That doesn’t mean that you can’t take advantage of it while installing the flooring, either. For each stair riser, here is what you need to do.
- Cut a vinyl board to fit the height and length of the riser you intend to work on.
- Apply an even layer of adhesive or glue on the back of the vinyl plank. Push it against your stir riser after that.
- Make it certain that the plank is fixed in all places. For maximum effect, use nails and screws. When the adhesive dries, the planks will be in fine shape. Fasteners should not be positioned between boards.
The stair tread is what you walk. Your stairwell may shift with time, causing the spot where you’ll install your plank treads to be less than perfectly square. Make sure the track measurements are correct by using a carpenter square.
The stair nose should be your next objective after the plank tread. Trim should be placed at the top and bottom of each stair. Remember that it will offer your staircase a stunning finish and appearance.
As a bonus, it will make the stairwells appear more secure and survive longer, even if they are heavily trafficked. Some stair treads have the stair nose integrated into them, making it easier for you to complete the job because it’s a single component.
Stair tread gauges can be used to measure the stair nose and the tread, so please follow these instructions.
- The bottom stair tread should be square by taking the distance between the treads and measuring them. If the tread isn’t square, you may have to trim the edges to help the corners fit.
- Make sure to account for the stair nose’s width when measuring the tread depth. In order to get a precise fit for the stair nose, you’ll need to make the plank short enough.
- If the stair’s depth is more than the width of a single board, a neighboring plank must be connected to make up the difference. The half plank should be placed at the stair tread’s back, while the entire plank should be placed at the front of the tread.
- Before you put the tread on the ground, make sure it fits properly by dry laying it.
There are some subfloors that feature an overhanging tread overlapping the riser, depending on the design of the subfloor. In which case, you may proceed directly to the next step without more ado.
Removing the overlap from your riser and tread on the stair flooring will make your life a lot easier if you have a nosing. Overlap the existing riser with lumber of the same thickness as the overlap to eliminate the subfloor nosing.
Any lumber you add to the subfloor of your stair risers must cover the entire area to make the vinyl plank get fixed to it.
You Might Also Love To Read About: Detailed Review On Epoxy Flooring
Cut The Tread & Nosing
Cut the first piece of tread, stair nosing, and riser with the appropriate cutter or a knife. For stair treads that require more than one plank, it is necessary to use a spare board to cut the other planks.
Any tool with a straight and long edge can be used, including a level. Even if you have a flooring cutter, you’ll still need a utility knife to make longitudinal cuts because generally, they cut from 12″ to 20″.
Use a saw with a fine-toothed blade if it is available. Crosscutting with a utility knife is best done using a speed square. Make a diagonal cut from the “T” end of the plank, which is at the top, to the opposite edge of the square.
In order to score the top, all you need is adequate pressure. Afterward, flex the vinyl where you cut and snap right into place. Tread and riser parts should be trimmed to remove the visible tongue.
Using this method assures that the planks are level with the borders of the riser and tread and that they will not be seen. Using the vinyl’s visible portion as a guide, use your blade to cut.
To remove the entire tongue, you may have to make two separate attempts. Finally, use a hacksaw to cut the nosing. To guarantee a straight cut, clamp your stair nose to a table to cut it properly.
A blade won’t work since it will bend the nose out of shape. It’s also possible to use a saw box to make a 90-degree cut.
Install The Stair Tread
It’s time to put the pieces together once you’ve made sure they fit perfectly. Glue or adhesive should be applied beneath every stair plank tread and pressed into place with less force to ensure a proper fit.
If you put the adhesive in an s-pattern, it will strengthen your new stairwell. The screws and nails will help keep the treads in place as you continue the installation. To hide them from view, use a riser and place them in the borders and corners of the room.
Install The Stair Nose
Depending on the type of nosing you choose, this is the final stage. It is up to you whether you choose a stair nose to snap over the planks or the other type but requires a piece of wood known as shims. Once you’ve decided on a style, here are some tips to keep in mind:
If you choose using the shim:
- To begin, dab some adhesive on the shim’s exposed edge. Follow the same step while nosing plank, but this time on top of it.
- Remember that the stair tread should not be covered at all by glue.
- Keep your fasteners an inch from the end of the tread and place four to five along the length of your nosing.
If you don’t use the shim:
- Nose glue is applied to the nosing and placed over the stair tread.
- No fasteners should be used.
Repeat Steps Until the Final Outcome
Steps should be repeated on the remaining stairwells. Remember to wait at least four hours before stepping on the vinyl planks. The curing time for vinyl adhesive will be specified in the product instructions.
Keep Reading: How To Get Rid Of Sticky Floorings
How To Install Vinyl Planks On A Landing
The landing on your staircase isn’t a problem! The steps for placing vinyl planks on a regular staircase and floor are the same. You’ll also need to add a stair nose to the border of the staircase.
So, take the landing’s measurements. This is where you’ll figure out how many rows you’ll need during the installation process. In addition, this will assist you to determine if you will need to cut the final piece of vinyl planks for the ultimate fit.
After taking measurements, cut the planks. Then, conduct a dry layer to ensure that everything is in place and that the finished product looks good.
Installing the entire plank along with the stair nose at the landing is next. Place the planks on the wall one by one. Keep in mind that these vinyl planks need to be glued down and not float.
Few Words Before Wrapping Up…
If you have a staircase, can you use vinyl planks? You may create a unique hardwood, marble, and stone look on your landing by using vinyl planks. In order to tie your stairway and floor together with a unique look in a cost-effective way, you might want to go for vinyl.
Vinyl planks are adaptable, useful, and cost-effective, making them a popular choice for most people. If you enjoy tackling home improvement chores on your own, these tools are perfect for you.
Some types of vinyl, on the other hand, may not be made of high-quality materials and may give off offensive odors. You have to check it thoroughly before purchasing the material.
Remember, the entire work is on you, so you should be cautious about what you are investing in. You can check with an expert before getting the material to prevent all your efforts from going in smelly stairs.
Other than that, the process is not very complex that you can’t do it. Make sure that preparation is done sticking to the guidelines with the help of this guide on how to install vinyl plank flooring on stairs so that you don’t face any trouble while installing it.
You would want it to look good and be durable and for ensuring that, it is a must that you follow each and every step without hesitation. All the best!
Keep Reading: Read Detailed Information On Warping Hardwood Floor