Are you looking for the best driveway sealers in 2022 for your or your friend’s or your client’s driveways? Then let us tell you we have got you back.
Just imagine you have a brand new car and you are about to drive it for the first time. Soon you take out your car from the garage, you find an unpleasant view of your driveway-cracks and holes.
You will feel disappointed instantly. A well-designed driveway can make a big difference in the appearance of a house. Unfortunately, they are subjected to extreme weather conditions on a regular basis, increasing their vulnerability to damage.
To be honest, they aren’t at the top of the priority list for the majority of homeowners. Because driveway repairs are expensive, mainly when they must be extensive, many people make a costly mistake.
As a result, it is possible to avoid such a situation by using a quality driveway sealer. However, there are both favorable and unfavorable driveway sealers, and these are the best driveway sealers in 2022 currently available.
In addition to reducing your home’s curb appeal, a damaged or discolored driveway gives the impression that your entire house is out of date and unappealing.
Since freeze-thaw cycles, harsh chemicals, and UV rays can damage the surface of your hardscape (concrete or asphalt), the best driveway sealer makes sense.
Sealing a driveway is a do-it-yourself project, whereas installing a driveway requires the expertise of a professional. Individual driveways and the reasons for sealing them will dictate which sealer is best.
Learn more about the best driveway sealers and asphalt sealers on the market, and discover why the purpose of formulating is among the best on the market.
Best Driveway Sealers In 2022 — Expert Reviews
1. Foundation Armour Penetrating Concrete Driveway Sealer
- 5X active ingredients to give you the best result.
- Can be applied directly from the bottle.
- A roller is enough to get the work done.
- No pungent smell or chemical toxins in the sealant.
- It can last up to 10 years.
Sealer approved by the Department of Transportation is a water-based silane-siloxane penetrating concrete sealer. Water absorption is reduced by up to 95 percent due to a chemical reaction that occurs within the pores of a substrate.
It is the best sealer for concrete, brick, and masonry surfaces that have not been previously sealed if you are going to look for a sealer that protects without altering the substrate’s appearance or feel.
What type of sealer do you prefer? Think about using the Armor SX5000 as an alternative. This penetrating sealer creates an impenetrable barrier to deicing chemicals, stains, salt, and freeze-thaw cycles for up to ten years with just one application.
This Foundation Armor sealer won’t alter the driveway’s appearance or leave a film after it dries. A paint roller or a sprayer can be used to apply a gallon of paint, which will cover up to 200 square feet.
You may wonder why we have selected Armor 5000 as the first choice in your product list. We could go on and on about how great it is. The primary consideration is the composition of this water-based sealer.
The second reason behind choosing this sealer is the simple usage process. When you go for this sealer, you do not have to hire any other professional to get the work done.
Using the Armor SX5000 WB, a hydrophobic (water repellent) wall is formed within the substrate’s pores. With a hydrophobic barrier, surface water absorption can be reduced by as much as 95 percent!
The deterioration and damage caused by water absorption, such as spalling, cracking, and splitting, will also be reduced when applying this sealant.
For years to come, the sealed surface will dry faster and appear cleaner than it did before the bead was removed. Concrete, brick, pavers, stucco, and natural stone surfaces can all benefit from this sealer.
Armor SX5000 WB is the perfect sealer for protecting your substrate without altering its appearance or color. Walkways, Driveways, pool decks, patios, garage floors, basements floors, retaining walls, and chimneys can all benefit from concrete or paver surfaces.
2. L R Liquid Rubber Waterproof Multi-Surface Sealer
- The product is a protective finish for floors, sloped roofs, and metal roofs.
- The coverage is almost 200 sqft per gallon.
- It does not have any chemicals and is 100% environmentally friendly.
- The product is bulletproof.
- It can cure or damage pots, stains easily.
In order to shield and seal surfaces from the components, this product creates a thick, long-lasting membrane on top of the surfaces it covers. Apply it to your driveway, and it will harden into a waterproof layer that protects your driveway from rain, snow, and moisture.
In addition, because it is UV-stable, the sun will have no effect on the driveway’s defenses. This sealer is able to cover almost everything from gaps to cracks to damages and also is bulletproof.
As a result, it is able to adapt to changes in temperature and season. A brush, roller, or paint sprayer is all you need to apply this highly protective coating to your driveway.
Be aware that this sealer is only for driveways and can bubble up if used in applications other than this one. Liquid Rubber believes that everybody should be able to use their own projects using high-quality, environmentally-friendly products and save money.
Water-based, VOC (volatile organic compounds) and solvent-free products from the brand cure to provide a fully adhered, flexible membrane that is able to prevent the ingress of water and resists deterioration from UV, salt, water, thermal cycling, and harmful chemicals, as well as a wide range of other environmental hazards.
Suitable for both residential and commercial use. As soon as the liquid rubber waterproof sealant has been dried, it becomes incredibly malleable. Small movements won’t ruin your hard work, thanks to the over 1000 percent elongation.
Do you still have concerns about how things will move? Liquid Rubber Seam Tape or Geo-Textile can help you protect your work from being tampered with or damaged.
The sun will not degrade Liquid Rubber Waterproof Sealant because it is UV Stable. This is basically the same as painting, but with the addition of heavy coats of waterproof membrane.
Access the container and begin using it immediately. You can seal the carton and use it later if you have extra material. Unlike two-component products, there is no pot life or work hours. Use a brush, roller, or a high-quality piston paint sprayer.
Numerous applications are possible for this environmentally friendly product. Consider using Liquid Rubber whenever a watertight seal is required. Metal, wood, and concrete are all good candidates for this application.
You can unleash your inner DIYer with Liquid Rubber if you want.
3. Rain Guard Sealer CR-0357 Micro-Seal For All Surfaces
- Can protect the driveway with 100% water-based sealant.
- It can resist water penetration.
- It has a protector safeguarding ability.
- No chemical is used in the manufacturing process.
- 10 years uninterrupted usage.
Your concrete driveway can benefit from this product’s excellent resistance. Deep penetrating power and dominance that your driveway will be guarded for several years from things like rain, salt, oil, and anti-freeze.
As a matter of fact, it comes with a 10-year warranty. It won’t alter the aesthetics of your driveway in any way, whether you apply it or not. Unlike some sealers, which turn yellow over time, this one maintains its sheen without altering the surface’s original look.
A clear finish silane siloxane coating protects, restores, and also enhances the life of your project. “Micro-seal is formulated by combining silanes and siloxanes, which have long been relied upon by architects, engineers, and property owners around the world to keep water out of their structures.
One of the Micro-proprietary seal’s ingredients is Micro-Lok, which guarantees a durable mechanical interlocking and generates a hydrophobic barrier that is resistant to the effects of weathering and other damaging elements.
The efflorescence and lime buildup caused by this product will also be reduced. Remember to clean any overspray from glass and exquisite metals with soap and water immediately after application.
Premixed and concentrated masonry sealer is available. With a hydrophobic coating, the stone sealer helps reinstate, protect, and extend the life of any horizontal or vertical surface of masonry.
The primary factor in this product’s selection is its water-based concrete sealer. Surface appearance is unaffected, and there is no film left behind. Non-yellowing technology and a no-sheen formula are used to make the concrete sealer.
For use as a primer before painting to resist moisture transfer or prevent stains such as gas, oil, and anti-freeze from adhering to the substrate.
Penetrating coatings resist salt spray, water, agents to remove ice, and wind-driven rain with outstanding resistance to water penetration. There is a 10-year satisfaction guarantee with RainGuard stone sealer, and it is safe to use in any climate.
Go for this product and make your driveway a pleasant and smooth one. Their customer care executives are very helpful and can solve all your queries in a jiffy.
Other Resources You May Like:
4. MasonryDefender Penetrating Concrete Sealer For Driveways
- It offers a long lasting shiny coating.
- The sealant is water repellent.
- It is a robust concrete sealer.
- The application is effortless and straightforward.
- Comes with a warranty of 3 years.
MasonryDefender Concrete Sealer is an excellent choice for weather-related destruction, such as pitting and cracking, because it provides comprehensive protection.
Because of its low cost, this sealant shields concrete from chemical damage caused by the frequent use of ice melts and similar products, leading to cracks or surface peeling.
A 1-gallon jug of the product is enough to cover 150 square tons of concrete. Cleaning the driveway thoroughly is the first step in getting the best results. Using a pump-type sprayer, apply the first coat of MasonryDefender.
A second coat isn’t necessary for a water- and chemical-resistant exterior that can shield the driveway for up to five years. It is an architecture and design grade silane/siloxane combined product that bonds with the mineral deposits in concrete and masonry and provides long-lasting water repellency.
It is ideal for concrete that requires the most protection from chloride ions (deicing salts). When applied, the MasonryDefender Concrete Driveway sealer will not alter the surface color or appearance because it is non-film-forming and allows for easy breathing.
Residential driveways, patios, and sidewalks can benefit from this product. Little or no gloss is produced, leaving the original color and texture of the substrate untouched. Dense surfaces may darken slightly.
Any surface should be tested first before being treated to ensure that the desired outcome is achieved. After using this product to clean the surface thoroughly, this product is meant to shield the freshly cleaned concrete from further damage.
Clean and allow to dry for at least 6 hours before using on your concrete before applying this product. This MasonryDefender All Purpose Masonry & Concrete Cleaner is ideal for removing debris that could obstruct the product’s ability to penetrate, such as grease, oils, efflorescence, wax, and curing compounds and coatings.
Using a low-pressure pump-up garden sprayer, splash a thin, even layer of cleaner onto the cleaned surface. Using a sprayer will ensure that your driveway is coated evenly.
Before the final absorption, the surface should remain wet for 2-3 minutes. Sealant should not be applied to puddles or ponds; instead, spread the sealant with a brush or broom.
Your surface will be dry in 2-6 hours, depending on the weather and humidity. Take it easy for a day or two before hitting the road.
5. ToughCrete Concrete Sealer For Driveways, Garage Floors & Other Surfaces
- The product is water-based and easy to use.
- It is water repellent.
- No chemicals are used in the production of the sealant.
- The water-based sealant gives a smooth finish.
- No issue with mixing.
ToughCrete is a siloxane penetrating sealer that the Department has approved of Transportation as being SAFE and environmentally friendly. Made with the best formula possible to ensure complete safety.
Professional contractors all over the world use ToughCrete on a daily basis! Beware of watered-down, low-concentration competitors. While many competing products look and perform similarly to ToughCrete, the years of performance you can expect from the product are significantly diminished.
ToughCrete is a water-based, high-solids product that can be used “as-is” without dilution and has a lifespan of 10+ years. Alternatively, you can dilute it as needed with water to maximize coverage and still have a long-lasting seal!
ToughCrete is able to reach deep into the concrete’s capillaries, protecting it from the elements and traffic for many years to come. The only thing you have to do is tell us, and they will give you a full refund.
A longer lifespan for your concrete driveway, sidewalks, and patios will increase the value of your home! Additionally, it can be used as a sealant for pavers and other types of blocks and cinder blocks.
As the best penetrating sealer, ToughCrete is a high-solids, water-based microemulsion crafted for years of protection against degradation, spalling, moisture, and salt damage.
Your concrete driveways, sidewalks, patios, and garage floors will last longer and be worth more, thanks to ToughCrete. Additionally, it can be used as a sealant for pavers and other types of blocks and cinder blocks.
When you are looking for an affordable water-based sealant is the best one for you. You have to be very particular about the mixing of the product so that there is no lump.
A lumpy mixing can lead to an uneven sealing process that will make the driveway’s appearance dull and less appealing. This does not necessarily mean that your driveway is ready for use after just a few hours of drying time.
Depending on the manufacturer, most products require you to wait for at least 24 to 72 hours before parking or driving your vehicle on the driveway. This sealant also takes a lot of time to cure. But, if you have that much patience, go for this product without delay.
6. E-Z Stir Driveway Asphalt Filler/Sealer
- As a repair and sealant for asphalt pavements.
- Improved traction and durability thanks to the reinforcements.
- Rubberized four times for increased durability.
- Effortless to mix and put on.
- The 5-gallon pail covers 250-500 square feet, depending on the texture of the surface.
If you’re looking for a filler and sealer in one, this is the product for you. The product has been specifically developed for use on the blacktop. Using this product is a breeze because all you have to do is stir it up before you start to apply it.
The product also dries quickly, so your driveway can be put to everyday use in just four hours. You must, however, refrain from driving on it for a period of 24 to 48 hours.
Henry E-Z Stir Driveway Asphalt Filler/Sealer is the best choice if you have an asphalt driveway in need of repairs and proper sealing. This two-in-one product fixes and protects your driveway simultaneously, trying to fill in cracks and other issues while safeguarding the entire surface.
You can cover anywhere from 250 to 500 square feet for each five-gallon carton of this sealer. Cracks up to 1/8-inch wide can be filled with the solution, which sets in just four hours.
As soon as 24 hours after submitting your application, you’ll be able to drive on your driveway again. Once the sealer has been applied, and all the cracks have been filled, your asphalt driveway will be more durable.
The rubberized mixture of water and sunlight remains off the asphalt below while also improving traction. Blacktop driveways, for example, benefit greatly from this product’s use as a filler and sealer coat.
The product is easy to stir and mix. 1/8″ thick surface cracks can be filled using this sealant. 4 hours later, it’s dry to the touch, and the path is drivable in 24 to 48 hours under normal circumstances.
The 5-gallon pail covers 250 to 500 square feet depending on the roughness of the surface. Exterior age and porosity, weather conditions, and application method all affect how much product is needed to cover a given area.
7. Concrete Sealer for Driveway & Walkways By Peerless Protection
- The product provides perfect protection from water and moisture.
- It will prevent your driveway from stains and potholes.
- The mixing process is easy.
- The product comes with an instruction manual.
- Comes with a warranty of 3 years.
- It can last up to 10 years.
Your concrete will last longer because it will be less likely to crack because of the concentrated silane/siloxane water-based emulsion. It has a broader coverage and a more durable seal than leading competitors.
Utilizing the Peerless Protection clear penetrating sealer couldn’t be any simpler. Depending on the project, different dilution ratios are acceptable. You can take a whole decade to find out whether our team has suggested you the best product.
The only thing you have to do is tell us, and they will give you a full refund. For us, it’s all about offering better care at home for the average person.
The Department has approved the siloxane concrete penetrating sealer for driveways and walkways of Transportation as a safe and environmentally friendly sealer.
Made with the best formula possible to ensure complete safety. Contact the company if you have any questions or need assistance with the application.
The crack preventing the ability of this Driveway & Walkway sealer is the essential benefit that you must not miss. If you are looking for a sealer that can prevent further damage to your driveway, go for this product without any delay.
One more thing you need to keep in mind is the mixing process of the sealer. You should follow the instructions that come with the product. This will help you to keep the ratio intact and avoid the formation of lumps.
For the most part, the protection that it provides will last for a very long time. Even better, it does not discolor the driveway as some other sealants do, and it does not emit a strong odor.
However, one of its most appealing features is that it is incredibly cost-effective.
8. DryWay Water-Repellent Concrete Sealer
- Seals that are watertight prevent water from getting in from the bottom.
- An ideal location for both pedestrians and vehicles alike.
- As a result, it prevents the soil from becoming saturated.
- Anti-fungal properties make it less noticeable.
- The sealant forms no film.
- Transparent so that the surface can retain its natural shape.
Using DryWay Concrete Sealer prevents chemical spills, water damage, freeze-thaw cycles, and road salts from harming concrete driveways, sidewalks, garage floorings, and pool decks.
It creates a barrier of water-repellency under the surface. The sealant prevents water from penetrating the concrete, allowing it to dry more quickly.
Chemical spills, water, and other liquids will bead or shed from the ground surface or from vehicles. Reduces yearly upkeep and is long-lasting. Inhibits the growth of fungi and moss on surfaces.
The DryWay concrete sealer aims to protect your driveway from mold, water, and different forms of degradation. The longevity of the product is also unmatched.
However, despite the film’s tendency to peel off, it would provide good protection for your driveway because it can resist ultraviolet radiation, oxidative degradation, and even high temperatures.
As well as algae and mould, this product can protect against cracking and corrosion. Using this sealer on your driveway will also make it much easier to clean because of the unique extra layer it creates.
The company says that this sealer will last for about five years, which is a reasonable amount of time. This sealing concrete and its application can also prevent mold and mildew on your driveway.
DryWay may not wholly prevent some organic growth, such as lichen and moss. In order to prevent deep water penetration into concrete, DryWay seals the porous concrete.
More gets absorbed into concrete to quicken up the drying process. When the sealing dries quickly, it lowers the risk of organic growth. Unlike other sealers, this one penetrates deep into the surface.
It is not the goal of a penetrating sealer to encapsulate the surface or alter the friction of the material. Subsurface chemical reactions take place. Surface stains are known as tannins.
Customers who are using their garage as an auto repair shop, workshop, mudroom, or porch often opt for this sealer because it is safe to use indoors.
9. Jetcoat Premium Driveway Sealer
- Anti-UV rays are protected by it.
- It covers a large area, between 250 and 400 square feet.
- Brush and roll-on spray can be used to apply the product.
- Make no bubbles or lumps of any kind.
Enhance asphalt pavement with Jetcoat Premium Driveway Filler and Sealer, which contains sand to provide additional filling, slip resistance, and durability.
This asphalt driveway filler is modified with Polymer and is water-based to ensure maximum sealing power. All asphalt and blacktop surfaces can be filled with this extra-strong driveway filler.
Concrete and masonry surfaces should not be used. This powerful and dynamic sealant can be used to fill in holes, gaps, and cracks quickly. Apply a thin, even coat of sealer to the wet pavement.
Try avoiding heavy or uneven applications if you want to avoid cracking or tracking. An elastomeric squeegee or brush should be used to apply the product. This sealant protects concrete surfaces from mold, oil, mildew, and other contaminants.
As a result of its composition, water and stains cannot infiltrate the surfaces after drying. A deterrent instead, the surface is kept intact. Additionally, you’ll be pleased to know that sunlight does not alter the color of the surfaces.
Ultraviolet radiation is well-protected by this sealer. The product’s only flaw is that it does not mix well with clay. You should apply the second coat at least 24 hours after the first coat so that it can dry and get smooth.
Depending on the porosity of the pavement, a pail can cover anywhere from 250 to 350 square feet of surface area. This product is simple to wash because it is water-based.
So we decided to add it to our list of the best-looking low-gloss concrete sealers. It all depends on how porous your pavers are. In this case, the “sponge factor” is a good analogy.
Pavers that absorb a lot of water or sealer tend to be more porous. Knowing the porous structure of your pavers is essential to determining how much sealer you’ll need.
Putting it into practice is easy after that. It’s time to pay attention to one thing! A single coat of paint will not suffice because two coats guarantee quality results and due to their durability.
10. AQUA-X Penetrating Concrete Sealer For Driveway, Patios & Other Surfaces
- Useful for a wide range of applications.
- Enhances the surface’s appearance.
- Non-yellowing concrete sealant is available.
- UV-resistant moist-appearing formulation.
- It has a five-year shelf life.
AQUA-X 11 is a concrete and stone sealer designed for professional use, but anyone can use it! Protect and enhance your concrete driveway’s aesthetics and the durability of your patio pavers or unglazed cement tiles.
This includes concrete block retaining walls, cast concrete, or an unpolished garage floor made of concrete. Protects against pitting, freeze-thaw, corrosion, and damage with salt after sealing with AQUA-X 11 because it is water-based and water repellent.
It’s a breeze to clean up and maintain this way. AQUA-X 11 Concrete & Stone Sealer has a pleasant odor and low VOCs, which many customers have noted in their reviews.
When used indoors, no masks or additional ventilation are required. Most surfaces can be treated with just one coat of AQUA X 11 with only a one-hour wait for pedestrians and two hours for vehicles.
Do not use this product if the temperature is anticipated to be below 50° for at least 48 hours after application. You can keep your patio pavers, concrete driveway, concrete block retaining wall, concrete block paving, unglazed cement tiles, cast concrete, natural stone, or your unpolished garage floor looking natural and long-lasting.
The process of sealing using AQUA-X 11 Concrete and Stone Sealer provides protection against stains, concrete spalling and, pitting, freeze-thaw, and more. Cleaning and maintenance are absolutely hassle-free.
Due to its low VOCs and odorless formula, AQUA-X 11 Concrete Sealer is a breath of fresh air for those who apply it. When used indoors, no masks or additional ventilation are required.
In terms of concrete, you can expect to get 100-400 square feet of coverage per gallon, and in terms of stone, up to 800 square feet of coverage per gallon, for an additional two to four years before re-sealing.
A single and easy coat of spray-on paint can be applied with the help of the guide and the video links that come with the product. 2 hours for vehicles, 1 hour for pedestrians.
Few Words Before Wrapping Up…
The best concrete sealers should be used to keep your path, driveway, concrete surface, garage floor in good condition. While some can be used inside the house, others can be used outside the house.
Wet floors and the thawing and freezing winter cycle are not adequately protected by some sealers, despite their claims of being resistant to all weather conditions.
Some people may have an adverse reaction to de-icers and other products containing chemicals or salt. Doing extensive research is necessary to find the best driveway sealers in 2022
Pavements around your home will look better and last longer if you seal them. It also fills in the minuscule holes in your skin. Sealing your concrete will be worthwhile, thanks to our list of the best driveway sealers.
The sealer that best suits your needs may have been found through our reviews. There are a few sealers on the market that are a little thinner than the rest.
They all protect against moisture, cold, dampness, and UV damage in their own unique ways. In addition to saving money, these Sealers also protect against moisture damage for up to seven years.
Please select a product and leave a comment about your experience with it.