If you’re looking for some of the best concrete sealers in 2022, then you’ve come to the right place.
Even if you don’t plan on staining or otherwise damaging the surface of your concrete, sealing it will help protect it from abrasive and physical damage.
Using it, you can both enhance the appearance of existing surfaces and protect brand-new ones for a fraction of the cost.
In addition, it’s a relatively simple undertaking that should take less than a day to complete. Clear and colored options are available, as well as wet or dry-looking finishes.
Make sure you buy enough to cover the area you’re working on and have the right tools for the application method you’ve selected.
When it comes to concrete sealers, how you apply them is just as important as the sealant itself.
In order to avoid grinding down the epoxy sealer or having an unappealing concrete look after ten years of use, you’ll want the right finish on your epoxy sealer applied the first time correctly.
Concrete surfaces can be preserved for many years by sealing them and protecting them from the damaging effects of water erosion, high temperatures, and other contaminants.
These best concrete sealers will always try to prevent further damage, and the life expectancy will be increased almost instantly.
Concrete is more resistant to stains and scuffs thanks to these treatments, but it also helps prevent moisture problems, which can lead to more severe problems down the road.
No matter what you choose to seal, it can be an interlocking paver driveway, an acid-stained floor, a pattern-stamped pool deck, or a pathway that is cracked.
The work of a good sealer is to preserve its appearance and enhance its longevity of the same.
Our top 10 picks of the best concrete sealers in 2022 from the market will help you evaluate the product’s basic features and compare those. So without looking any further let’s dive in.
Best Concrete Sealers In 2022 — Expert Reviews
1. Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer
- Improve the appearance of deteriorated and worn-out concrete.
- It can last for up to 7 years.
- There is a lot of product in the large tin.
- Moisture damage can be prevented.
- Reduces surface abrasion-induced dusting and degradation of concrete.
The Foundation Armor Solvent Concrete Sealant is a sealer that is based on solvents. The low-gloss sealer is ideal for aged and drab concrete because it provides a wet surface that enhances its natural color.
The sealer ensures a life of three years on exterior paints and seven on interiors, even on unsealed floors and pathways.
This tin contains five gallons, which the maker claims will cover 175 square feet. With its low price and huge tin, this concrete sealant is an excellent value.
Sealing the concrete’s porous holes and keeping moisture from entering the material are the goals of the A350 sealer.
The Foundation Armor Solvent Sealer tries to protect abstract surfaces and stop the growth of alkaline surfaces.
Seal, improve, and preserve the concrete and concrete paver surfaces using the Armor AR350 solvent-based acrylic wet appearance sealer.
The sealer prevents non-yellowing of the surface where the sealer is used and gives a darker and shiny finish with a glossy effect.
Surface type, age, porosity, condition, application method, and amount of substance applied all have a role in how much shine and enhancement can be achieved.
First, we recommend applying the sealant to a small surface section to get an accurate idea of the finished result. Designed for use on poured, stamped, aggregate, and paver-surfaced masonry.
No natural stone should ever be used in conjunction with this product. Armor WL550 and Armor SX5000 WB are better options for sealing red clay brick, slate, flagstone, or any other natural stone.
Armor AR350 covers up to 175 square feet per coat in a single gallon. Always go for two coats to get the best results. The coverage will vary from the printability of the surface on which it is applied.
If you’re planning and looking for some amazing paints for your basements then you must check our detailed guide on them.
2. Siloxa-Tek 8500 Penetrating Concrete Sealer
- Good value for the money spent.
- Provides water resistance.
- Sunlight won’t fade or discolor.
- Penetrate since it never delaminates or peels, never diffuses, and never flakes.
- The product is ready to use as soon as you remove it from the packaging.
Sealer solution Lithi-Tek 9500 Ultra Concentrate Penetrating Concrete Sealer is a sealant that is well-concentrated.
The one-gallon bottle of concentrate is comparable to purchasing a five-gallon bottle of the solution because it must be blended with one part sealant to four parts water.
As a result, the sealer provides good value for money, as a single bottle can treat up to 1,000 square feet of flooring. Strengthens and protects concrete with an industrial-grade sealant.
In addition to providing abrasion resistance, it also helps to keep the concrete dry. Even when dry, you won’t notice that Ghostshield is there, other than from the level of protection that it provides.
No requirement for a second favorable weather window is required because the second coat can be applied before another has completely dried.
Spraying, spreading, or brushing the liquid onto the surface are all acceptable methods of application.
Water-based chloride and water-based water repellent that is nanotechnology-driven, clear, breathable, and deep penetrating are now available.
Water-soluble harmful substances, as well as freeze/thaw cycles, are both protected by Siloxa-Tek 8500, a deep penetrating water repellent.
An additional layer of protection is provided by its clever nanoparticles, which penetrate even deeper into the skin than previously thought possible.
Chloride and water absorption are dramatically reduced as a result of the surface tension change that occurs when the hydrophobic barrier is applied.
As a contrast to typical silane isomers, patented nanotechnology delivers deeper penetration that extends the life of the concrete, creating an unseen barrier that preserves its natural appearance.
According to the manufacturer, the Ghostshield sealer should only be used on driveways that are not exposed to freezing winter weather or deicing salts. A different product may be necessary if you reside in a cold area.
Protecting concrete against deicing salt, chloride, or freeze-thaw damage is only one of the benefits of this clear penetrating concrete sealer’s hydrophobic nature.
You can enjoy some fantastic benefits like a natural finish. It helps prevent water and salt damage; brush and sprayer application is also quickly done with the help of this sealer.
3. DOMINATOR SG+ High Gloss Paver and Decorative Concrete Sealer
- It protects your concrete against UV rays.
- It has a great coverage rate, like 250-400 square feet.
- The application is easy to brush and roll-on spray.
- Do not create any bubble or lump.
- Low in VOCs.
Concrete and brick pavers can be difficult to restore to their former glory. We can only assume that this is the case since you are using the incorrect product.
Get yourself a DOMINATOR LG+ pave sealer, would you? And the solutions to all of these issues are on the horizon.
An attractive, low-gloss finish is provided by this product, which enhances the color of various surfaces such as driveways, sidewalks, and other ornamental ones.
So, rather than leaving your pavers with their original color, use this sealant to brighten them slightly. This paver sealant guards against mold, mildew, oil, and other contaminants on concrete surfaces.
In addition, the composition prevents water and stains from infiltrating the surfaces after drying has occurred. Instead, it acts as a deterrent, keeping the surface intact.
You’ll also be relieved to learn that exposure to sunshine does not affect the color of the surfaces. The sealer is well-made to resist harmful ultraviolet radiation.
The single shortcoming of the product is that it does not go well with clay. With DOMINATOR Paver Sealers, you can achieve the unimaginable appearance of your home that you have always craved for.
They extend the life of your pavers or ornamental concrete by reviving faded colors and increasing their durability. High, medium, and low gloss options are all available, as well as no-gloss (NG+).
In addition to delivering excellent UV protection and low slip potential, this sealant’s film-forming technology allows it to be applied to porous surfaces such as pavers.
It prevents oil stains and other spills from damaging your investment. When it comes to the scent of this product, it doesn’t have any. Why? Because it’s made without the use of solvents.
About 2000 square feet of surface can be covered in a 5-gallon bottle. Wait at least 45 minutes for the first coat to dry before applying the second coat. Then, you’ll get the finish you want.
Because it is water-based, this product is easy to clean up. And that piqued our interest in adding this to our list of the best-wet look low gloss concrete sealers!
It all depends on the porousness of your pavers. The “sponge factor” is a good analogy for this. In general, the more sealer or liquid that a paver absorbs, the more porous the paver is.
To figure out how much sealer you’ll need, you first need to know the porosity of your pavers.
4. Armor AR350 Wet Look Concrete Sealer and Paver Sealer
- Use for a variety of purposes.
- Improves the color of the surface.
- The concrete sealant is non-yellowing.
- Formulation with a moist appearance that is UV resistant.
- It can last for up to 5 years.
Do you know what to do with the concrete around your home? Indeed, it deserves a sealer solution that is capable of balancing both aesthetics and durability.
An excellent option for that would be AR350 from Armor Armament! To achieve a wet look and maximum weather protection, this concrete sealer has been specifically designed.
Using its non-yellowing formula, it offers UV protection to concrete for up to 5 years. In addition to protecting the texture from fading, black smudging, and hot tire pickup, it blocks out UV radiation.
This sealer can enhance the color of colored surfaces. Another fantastic feature is that it is incredibly water-resistant.
As a result, rainwater is ejected from the surface. This also makes it easier to clean because dirt and grime won’t adhere to the coating.
One gallon of this sealant is provided. In just two coats, you can easily cover 100 square feet. Compared to other products (on our list), this one covers a smaller area to save time.
Order the coverage package that you expect. The container’s easy-to-grip handle makes it convenient to hold.
After that, it’s a cinch to put it into practice. Please be aware of one thing! A single coat of paint is not enough. Because using two coats ensures the best results and long-term durability.
ARMOR AR350 sealer is an excellent choice if you want a high-quality concrete surface sealer that will protect it and enhance its appearance. The sealer can give you protection and a long-lasting finish.
If you wish to seal slate, red clay brick, flagstone, and more, this sealer can help you solve every problem that you have.
In addition to poured and stamped concrete surfaces, aggregate concrete and paver surfaces are all excellent candidates for the Armor AR350 sealer.
Even solvent-based acrylics can be used to seal unsealed surfaces. Your concrete will look new and highly appealing. Go for it without any delay.
5. RAIN Guard PRO-CR-0356 Micro-Seal Water Based Concrete Sealer
- A clear-seal hybrid acrylic with a urethane base that has a clear seal.
- Clear coating with a low sheen.
- There is no need to mix this product.
- It is available in 1- and 5-gallon jugs.
- The product may provide coverage for up to 300 square feet on both new and aged surfaces.
- The formulation is U-resistant and non-yellowing.
- The material is resistant to hot tire marks and solid vehicular impacts.
Rain Guard is an acrylic urethane cement sealer that may be used on a range of interiors and outdoor, including concrete, substrates, masonry, stone, and wood. It is available as a clear acrylic urethane cement sealer.
Using a Rain Guard sealer, you can keep your surfaces safe from water and chemical spills. It also helps to prevent wear and tear from automotive and pedestrian activity.
Not to add that it is resistant to UV damage, which includes peeling, fading, and yellowing of the skin. Rain Guard is available in one-gallon and five-gallon sizes.
A single gallon of this sealer will be able to cover almost 200-400 square feet. The completed product is unambiguous.
It has a wetting effect on concrete surfaces, making them appear shinier and brighter as a result. Even though some customers complained that the lotion wore off too quickly, we felt that it provided comprehensive and dependable coverage.
Some of the causes of poor results include mistakes in the application process; the humidity percentage is higher than usual, preparation was not perfect.
We felt more secure understanding that Rain Guard was a water-based sealer with a low odor and low volatile organic compounds (VOCs).
It will protect your flooring from spills and damage while not interfering with your overall health and wellbeing. Rain Guard is packaged in opaque white plastic containers to screen out the light.
The handles and spouts on these containers are located above the container. As a result, it is much easier to stay away from messes and spills.
It is recommended that you apply the clear waterproof spray as a primer before painting to prevent the absorption of moisture in the substrate and guard against stains such as oil, gas, and antifreeze.
100% penetrating coating helps in resisting water seeping in, ice removal chemicals, salt spray, and other harmful elements.
Resistant sealer safeguards your money with a 10-year satisfaction guarantee and can be used anywhere in the United States of America.
6. MasonryDefender Penetrating Concrete Sealer
- Powerful sealer to provide utmost protection.
- Long-lasting with no harmful chemicals.
- Completely moisture and water-resistant.
- Comes with a warranty of 3 years.
- Easy and simple to mix and apply.
MasonryDefender Concrete Driveway Sealer is an architectural quality product with proper water resistance and blending.
This product is suitable for concrete applications where maximum chloride ion (de-icing salt) protection is required.
A breathable, non-film forming concrete sealer that will not alter the color or appearance of the concrete surface, MasonryDefender Concrete Driveway Sealer is ideal for driveways and sidewalks.
This concrete sealer provides long-lasting protection for most horizontal, above-grade concrete surfaces on the exterior.
Products such as this one are appropriate for use on the residential driveway, patio, or sidewalk surfaces. The substrate’s natural color and surface texture are not altered, and little or no gloss is produced.
On dense surfaces, a slight darkening of the surface may occur. Before treating any surface, it is recommended to conduct tests to assure the intended outcomes.
Use MasonryDefender Concrete Sealer to protect and brighten the appearance of your driveway at the same time. Cracking and pitting caused by moisture seeping into the concrete over time are prevented.
Using the solution, water will bead rather than start to seep into your driveway and cause additional damage. It will be much easier to maintain the system in the future.
With a broom or garden hose, simply remove any dirt, pollen, mildew, leaves, or if you want to remove unused paint from concrete.
Mold, mildew, and moisture will no longer be able to penetrate the surface of your concrete driveway, patio, or sidewalk.
You don’t have to spend hours scrubbing your driveway with a pressure washer. Protect yourself for up to five years.
Following a thorough cleaning with MasonryDefender All Purpose Masonry & Concrete Cleaner, this product is intended to provide protection for concrete sidewalks, driveways, and patios.
For a minimum of three hours after application, the air and driveway temperature should be 40°F or higher. Apply a thin, even layer of a low-pressure pump-up garden sprayer to your surface once it is free of dirt and debris.
You can evenly coat your driveway with a sprayer. Two or three minutes of remaining wet time is recommended before completing absorption.
Avoid puddles and ponds; instead, use a broom or brush to spread the sealant evenly across the surface. Depending on the temperature and humidity, the surface will be dry in 2-6 hours. Before driving on the surface, wait at least 24 hours.
7. DryWay Water-Repellent Concrete Sealer
- Watertight seals prevent deep water from getting in.
- Suitable for pedestrian and vehicular traffic.
- Ensures that the substrate does not become saturated with water.
- Reduces the appearance of unsightly fungus.
- The sealant does not form a film.
- Transparent, allowing the surface to retain its natural appearance.
All of these materials can be treated with the DryWay Water-Repellent Brick, Paver, and Masonry Sealers that are water-based and silane and siloxane-based sealer.
While it can last up to seven years when applied to solid concrete, you will need to reapply more frequently if exposed to the elements.
Because of its excellent water repellent properties, the silane sealer offers excellent protection from rain and other inclement weather.
The liquid can be used on various surfaces, including paths, driveways, garage floors, and others, and it is resistant to salts and de-icing chemicals.
Lichen and moss growth can break down concrete and make it more slippery, but DryWay prevents this by preventing it from growing. Lichen and moss growth can also make your driveway look unsightly.
For example, the DryWay system does not encourage water beads to form, and many surfaces will instead shed water rather than a bead.
Even though the sealer is still keeping moisture out, many users are expecting water beads to form. Unlike other sealers, DryWay Concrete Sealer is a water-resistant sealant for sidewalks, concrete driveways, garage floors, pavers, and patio bricks, as well as pool decks.
A water-repellent barrier is formed beneath the concrete surface. Concrete can dry quickly thanks to the sealant’s ability to prevent deep water penetration.
Surface water, vehicle fluids, and chemical spills will all bead or be shed by this material. A long-term investment that will save you money in the long run.
Inhibits the growth of fungi and moss on surfaces. Most DryWay-treated surfaces will bead water, but the degree of beading depends mainly on the surface profile and the finishing techniques used on the surface in question.
Surfaces with coarser, deeper finishes are more prone to shedding surface water, and beading may be impossible on these types of surfaces.
A topical sealer like DryWay will only cover the surface of the substrate, not penetrate it. A sealer’s ability to bead is not a reliable indicator that it is working.
Having beads in a sealer isn’t always a good thing, depending on the application. Sealing concrete, like trying to install vinyl siding on your home, helps prevent the growth of mold and mildew.
There is some organic growth that DryWay does not entirely prevent, such as moss and lichen. In order to prevent deep water penetration into concrete, DryWay seals the concrete’s pores.
The quicker the concrete dries, the less water it takes in. The less time it takes for the concrete to dry, the less likely it is that organic growth will occur.
DryWay is a sealant that penetrates the surface. Using a penetrating sealer means that the surface will not be encapsulated or changed in terms of its coefficient of friction.
Soil-dwelling chemicals do their work. Surface stains are called tannins. Although the sealer could indeed help and improve maintenance, organic shadowing cannot be eliminated entirely.
8. Rain Guard SP-4004 Water & Concrete Sealer Ready To Use
- An anti-yellowing formula.
- Seals and stabilizes concrete joints with a long-lasting wet look sealer.
- Concrete surfaces are ideal for this product.
- A non-slip gloss surface.
- Easy to use and apply.
Rainguard Water Sealers Concrete Sealer protects, restores, and extends the life of your project. Concrete sealer is a water-based silane/siloxane, and it is entirely water repellent so that the life expectancy improves.
In addition to being able to be used indoors or outdoors, it dries to an invisible, natural finish. Remove dust, dirt, and other harmful contaminants that remain on the entire surface.
Use Rainguard Cleaner/Prep and a soft bristle brush to remove any stains. Once the surface has been thoroughly cleaned, allow it to dry completely.
Allow the sealer to penetrate the surface for maximum protection by allowing it to dry before applying it. Consider your surface to be like a sponge that can be used to soak up liquids.
There will be less capacity to absorb when you use a wet sponge. Cover the areas that you do not want to seal; use a cotton cloth for the same.
Overspray on your lawn or plants will have no effect. However, you should move or cover large leaf plants if you see droplets from the overspray on them.
The Rain Guard CONCRETE sealer is designed to maintain your concrete surfaces’ original color, texture, and gloss while extending their lifespan and increasing their value.
Architectural-grade silane siloxane technology will keep your surface safeguarded for a prolonged period. Suitable for both vertical and horizontal surfaces, both inside and outside.
Rain Guard’s products are safe for humans, animals, and plants. What distinguishes this product from the others?
Their proprietary ingredient, MICRO-LOK, provides a hydrophobic barrier that is resistant to dirt and water, salt, UV light, and wind-driven rain.
Cleaning up is as simple as using soap and water. Paints, Brick, Pavers, Stone Wood, Stuccoes, and Concrete around your home can be protected by our other specialty-formulated products.
9. EnduraSeal 100% Acrylic “Wet Look” Semi Gloss Concrete Sealer
- Effective on a wide range of substrates.
- Improves the appearance of old concrete with a wet look finish.
- Not at all expensive.
- No issue with mixing and application.
- Doesn’t get yellow over time.
It’s an acrylic sealer, EnduraSeal Semi-Gloss Concrete Sealer. Thus, it forms a physical barrier on the concrete’s surface and leaves behind a wet appearance.
When applied to worn-out or damaged concrete, wet look sealers breathe new life into the surface while also improving its color and finish.
EnduraSeal is marketed as a sealer for concrete, but it can also be used on terrazzo, stone, and colored concrete.
The liquid sealer will be able to cover 150 to 300 square feet by using it mixing 1 gallon, but make sure to give a double coating.
Damage to older concrete can increase its porosity, making it harder to work with than newer concrete that’s less porous.
Using this EnduraSeal on indoor surfaces can cause a strong odor, so it should only be used outside or in the garage. Because of the white haze, it can leave behind; this sealer is not recommended for damp areas.
It’s time to add a wet look to your outdoor concrete. ENDURASEAL’s 100 percent pure acrylic concrete sealer might be just what you’ve been looking for!
With over 50 years of experience in the sealant business, EnduraSeal is a name you can trust. This company’s product line includes more than just solvent and water-based sealers.
One can rely on their products to be amongst the best on the market. You can rest easy knowing that the EnduraSeal concrete sealer is a high-quality and dependable option.
An attractive wet look can be achieved with the use of this 100% acrylic sealer. This product can be used on pavers, stained concrete, tiles, stones, and pebble surfaces.
For many years to come, your surfaces will be protected from yellowing with this product. A shifting paver-sidewalk can be prevented using this sealer.
For the walkway’s longevity, it will conjugate them. Stabilize and seal the joints with two thin coats of sealant since it has a highly durable and long-lasting formula.
Before applying the sealer, help ensure the surface is absolutely clean and also free of rust. To make transportation more straightforward, it comes in a 5-gallon container.
It also has a very faint smell, which is a nice touch. With the included plastic jug, you can pour the sealer from one area to the next as you work.
Use a roller to apply this sealer for the best results. About 750 to 1500 square feet can be covered by the 5-gallon capacity of the sprayer.
However, whether you use one or two coats will have an impact. Surface porosity affects coverage in this case, too.
This product can be used to protect colored, stamped, stained, along with overexposed driveways. In addition, the sheen on the surface will be enhanced. You’ll be amazed at how flawless this person is!
10. RadonSeal Standard Deep Penetrating Concrete Sealer
- Has no need for a primer.
- When Ready Seal is first applied, it has the darkest color.
- It takes about an hour for it to attain its final shade.
- Be applied to the wood’s surface with a sprayer, roller, or brush.
- It doesn’t require brushing the back and won’t leave behind runs, laps, or streaks like other methods.
With the use of RadonSeal Standard Concrete Sealer, capillaries within poured concrete and high-quality concrete mixture substrates can be completely sealed.
A chemical reaction, bonding, and inherent sealing of the concrete matrix are achieved through the use of RadonSeal.
Concrete slab-on-grade or garage floors are commonly treated with RadonSeal Standard to prevent wicking water, capillary water seepage, and soil gases from escaping through the porous concrete.
Hardens and protects concrete from cracking, dusting, or efflorescence, freeze-thaw and road salts and deicing chemicals, as well as minor defects.
Concrete’s pores, which are invisible to the naked eye, make up between 12 and 18 percent of its mass. Most of the water in freshly poured concrete evaporates within a few hours.
Capillary pores in concrete are formed when excess water seeps to the surface. Because of the lower air pressure found inside most buildings, vapors such as water vapor and soil gases can easily pass through.
Surface tension acts as a restraining force for liquid water. In order to apply clear coatings and other moisture-sensitive floorings, it is recommended to seal concrete with high moisture rates first.
RadonSeal seals the pores of the concrete to prevent water and vapor from wicking through. Helps epoxy and paints resist cracking and peeling by blocking efflorescence.
Prevents hardwood floors from buckling and delaminating clear coatings. Concrete pores are filled with water vapor and soil gases, which prevent capillary water seepage.
Protects concrete surfaces from freeze-thaw, road salts, and minor defects by strengthening and hardening them. Alkali attack is reduced by reducing efflorescence in paint and epoxy coatings.
Delamination and blushing of clear coatings can be prevented by using this product. Indoor poured concrete that is less than 20 years old is recommended. Concrete that was poured less than two years ago.
Concrete blocks and poured concrete older than 20 years can be treated with RadonSeal Plus.
To keep your driveway, path, garage floor, or any other concrete surface in good condition, you should use the best concrete sealers. For example, some are intended for use inside the home while others are meant for use outside.
Certain brands and styles of sealers are less effective at protecting wet floors or against the freezing-and-thawing cycle of winter, even though they claim to be resistant to cold weather, moisture, and dampness alike.
De-icers and other products that contain chemicals or salt may be problematic for some people. Choosing the suitable sealant for your concrete requires thorough research.
A driveway or other concrete protection can cause you to spend hundreds of dollars. The wrong sealer will automatically give you the requirement of buying a new one.
When things go wrong, and your concrete is stained and damaged beyond repair, buying another bottle of concrete sealer isn’t an option.
In addition to beautifying the concrete surfaces around your home, sealing them also extends their lifespan. Additionally, it fills in the tiny gaps in your skin. With our list of the top 10 best concrete sealers, your sealing will be meaningful!
You may have found the sealer that best meets your needs by reading our reviews. Some of the sealers are a bit thin compared to any other sealers available in the market.
However, each one of these can protect against wet, cold, damp, UV damage, and more. These Sealers are even more cost-effective, as they provide up to seven years of protection against moisture damage.
Choose the product of your choice and comment here to share your experience.