Can You Paint Shower Floors? [All You Need To Know]

This page contains affiliate links and we earn a commission if you make a purchase through one of the links, at no cost to you. As an Amazon Associate we earn from qualifying purchases.

Can you paint shower floors? That’s a good question. Your shower floor can be painted. Shower floors can get infested with bacteria and mold when they aren’t properly cleaned and painted.

Increases the shower floor’s strength and longevity, making it more resistant to wear and tear as time goes on.

On the other hand, the shower floor should only be painted with moisture-resistant paint due to the floor’s exposure to moisture.

Oil-based paint is the finest choice for a shower floor. Shower floors can benefit from oil-based paints because they are long-lasting, robust, and water-resistant.

But there’s more to it than that. When painting over shower floors, there is more to learn. Is it possible to paint a shower floor and have it not come off? We’ll find out.

Can You Paint Shower Floors? Is It Possible

The short answer to this question is “yes,” your shower floor can be painted. Shower floors are plagued by various issues, including mold, germs, inadequate drainage systems, and expensive maintenance expenses.


Repainting your bathroom’s shower floor can solve many problems while keeping the space tidy. Some people may opt to hire a professional to complete the task for them, while others may prefer to do it themselves.

Shower floors are typically built of materials that may be painted on, such as concrete, so the paint should attach to the floor.

However, this only applies to shower floors that have just been installed. The paint may not adhere adequately to a shower floor that has previously been designed for daily use.

As a result, the shower floor will have been covered in hair, soap, body oils, and water, making it difficult to clean.

The paint can’t adhere to the shower floor if it is covered in a layer of dirt and grime. Paint will come away and blister off of such a floor for a shower if it is painted directly on it.

To ensure that the paint adheres to the shower floor, you should first clean, scrub, and dry it thoroughly. When painting a shower floor, keep in mind that the paint may not adhere to it if it has already been painted.

This is because shower floors are typically painted with hard, water-resistant paints so that the fresh paint won’t attach to them.

Therefore, sanding off or removing the old paint before applying a fresh coat is necessary. A shower floor should be painted with a specific sort of paint. We’ll find out.

Keep Reading: Detailed Comparison On Sanded & Unsanded Grout

Type Of Paint To Be Used For Shower Floor

With flooring painting, you have a lot of freedom regarding color, pattern, texture, and design options. People have varied preferences for the colors, patterns, and lighting used on the surface they are decorating.

If you know what materials your floor is made of, it will be easier to select the right paint color for it. Concrete, tile, and wood are just a few common flooring options.

You can experiment with different color schemes until you discover the right one. Countertops, shower floors, bathtubs, and other wet areas do not match epoxy coatings.

The glazes on tile surfaces can be sorted out with the help of a latex-epoxy paint combination. Instead of changing your flooring on a regular basis, painting your shower flooring is a more cost-effective option for interior upkeep and sanitation.

Moreover, it provides a personal touch to your living space.

How To Paint Shower Floor – Complete Process

Compared to tiles, wood, and various other surfaces such as marble or granite, a concrete shower floor is fundamentally different in terms of how it is painted.

If you’re painting on the floor, one of the most typical issues you’ll run into is controlling the humidity to keep it from harming the quality of the paint.

Freshly poured concrete may contain significant moisture levels as it cures, making a concrete floor an undesirable option.

It’s always a great idea to give time so that your concrete floor has fully cured before painting it. To avoid cracking and peeling, make sure your paint composition matches the material you’re painting it over.

When painting a shower floor made of concrete, it’s good to familiarize yourself with the fundamentals.

Get Rid Of Existing Paint

The concrete floor must first be stripped of any existing finish or paint before further work begins. Remove the old paint using a paint scraper or paint stripper.

Once the paint has been removed, use a wire to remove any remaining dirt from the floor. Pour some concrete paste into the cracks and let the floor heal for several hours if it is damaged or cracked.

If you’re painting over a newly-installed shower floor made of concrete, wait for the concrete to cure completely before proceeding. A few days are needed for this. A dehumidifier helps speed up the drying process.

Clean The Floor

Once the shower floor is clean, the following step is to seal it. As previously stated, shower floors are often covered in soap scum, oil, and other debris.

All of these should be removed since they prevent the paint from adhering correctly to the floor and hence must be removed. Clean water and detergent are all that are required for this task.

Then scrub the shower floor with soapy water and a scouring brush. Rinse the floor thoroughly with water after removing the dirt, then leave it to dry for a few days.

Prime The Shower Floor

Apply a few coats of primer to the shower floor made of concrete when it is dry. Make sure to choose a primer that is both stain-blocking and moisture-resistant.

The polish on most concrete surfaces is affected by the unevenness of the surface. However, the priming layer can be applied to the concrete and give a flat surface for the paint to adhere to.

Apply Paint

You can apply paint on the floor when the priming has dried. Use epoxy paint, which is specifically intended for shower floors.

So, it is essential to note that you will need to mix epoxy paints before using them because they arrive in two separate containers.

You should wait at least three days before taking a shower on a wet shower floor.

Keep Reading: Difference Between Caulk & Grout

How To Paint Shower Floor Tiles – Complete Process

Because of their strength and visual appeal, shower tiles make an excellent choice for use as shower flooring. There are numerous tile designs to choose from and numerous pattern and color combinations to choose from.

You can save money on your home’s upkeep by painting your shower floor tiles. Because of this, you’ll be able to select the floor design that best suits your personal style and preferences.

Required Things

Before you begin painting, ensure you have all the necessary supplies. The following are possible necessities:

  • Grit sander
  • Paint
  • Primer
  • Plastic sheets
  • Protective gears like Goggles, gloves, etc.
  • Painters Tape
  • Cardboard/ newspapers

The most appropriate products for shower floor tiles painting can continuously be researched online or consulted with a local specialist.

Here is a step-by-step guide to performing the painting job successfully:

Shower Tiles Cleaning

As a result, shower floor tiles are regularly subjected to both filth and moisture. Before painting your floor tiles, make sure the surface is free of dirt and debris.

If the tiles aren’t thoroughly cleaned of dirt and dust particles, they may end up with discoloration areas. Compared to other types of flooring, floor tiles are effortless to keep clean; therefore, this shouldn’t be an issue.

Seal The Edges With Tape

When it comes to defining surfaces and patterns, painter’s tape is the best tool to have. Using masking tape to cover the edges and corners of the shower can help you avoid brushstrokes on doors, walls, and other undesirable surfaces when painting the floor.

Select The Right Paint

Shower floor tiles benefit significantly from the use of oil-based paint. Because oil-based paint has advantages over ordinary paint, such as waterproofing and a more appealing surface, it is a better option than regular paints.

Apply The Paint

Before painting your tiles, inspect them for cracks and unevenness. Cracks can be filled with a primer, which also levels off the surface.

Additionally, you can use a sander to remove the gloss or shine that may influence the quality of your painting. When painting on a non-textured surface, paint tends to be more challenging to adhere to.

Using a suitable paint color, apply longer and even strokes to the flooring surface in successive layers until the desired effect is achieved.

Keep Reading: Know More About Waterproofness Of Sanded Caulk

Final Verdict

Using a tile cleaning matched to your tile is all that is needed to keep the color and abrasive dirt out of the sealed, painted tile.

Floor mats and floor pads can be used to prevent scuff marks and impressions from affecting the paint job in high-traffic areas.

You may simply use an artist’s paintbrush and some of your remaining paint to touch up any imperfections in the paintwork before re-sealing the affected area.

Ensure that you wear the safety gear to keep you and your environment protected and follow the step-by-step guide on the query “can you paint shower floors” to give it the most desired finish.

Leave a Comment

Explore Us

Follow Us On:

About Us

House Whirl Logo White has a team of professional industry experts to help you find guides on painting, finishing, flooring, bathroom & kitchen to make your home look stunning. We have tested, researched & written hundreds of buying guides to help you select the top-notch & affordable products out there!

Disclosure is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to